Select Page

China Professional Tansfer Case Timing Chain Transmission Gear Chain Box Chain Car Transfer Output Shaft Drive Chain 5012322ab 26976 30965 Hv-071 Hv-062 for Jeep GM 22500 12547628

Product Description

We have All Spare Parts for CHINAMFG and Japanese Pickups, and also series parts for different cars.

High quality products Original, Made in ZheJiang , Made in China Mainland, 6AB 3.Suitable for: Jeep NVG 4. Delivery Time: Normally Within 1-15 days after deposit or as customers’ requirement, depend on stock 5.Advantages: 1. Factory direct,Original quality and lower price.
2. Most of the items in stocks,we can send the items to you in a short time.
3. Sincere service,if any problem after you recieved the goods,please contact us freely,the best solution will be offered.

Detailed Photo

Guest evaluation

Good feedback from customers is the highest recognition of our products. With the development of made in China, suppliers always describe their products with the best quality, but I think the best products come from the recognition of customers.

 

A good evaluation, across the distance between different countries, to enhance our mutual trust and feelings. Really good cooperation is mutual understanding and tolerance, just like the friendship between China and other countries.

 

I also hope to have an opportunity to cooperate with you. Just like the evaluation given to me by my guests, I believe you will also have a good harvest and profit.

Related Products

In order to ensure sufficient demand for guests, we produce all models of chains. What you need to do is to provide us with accurate numbers and pictures. I can make the same chain for you.

Work Shop

Our production workshop covers an area of more than 6000 square meters, more than 200 machines and more than 30 kinds of development and testing equipment. And the professional management and production level in ZheJiang –Real original factory in China

Quality Control

Each of our chains will undergo strict 100% manual test, machine test and anti rust treatment. Only through strict testing can we do a better quality assurance and let guests trust our products more. 

Customers Endorsements & Exhibition

Guests from various countries had come to visit my factory and are very satisfied with our production level and chain. They have maintained a good cooperative relationship for many years. We also participate in ZheJiang Frankfurt Auto Parts Exhibition and HangZhou Exhibition and so on.Every time we have new guests and new cooperation.

Packaging

As for packaging, we will customize or conventional packaging according to customers’ requirements.                        P. E bag + antirust paper + box+Carton

Our Certificate

Our products have passed ISO 9001 and ISO 14001 certification,and Made-in-China strength factory certification

FAQ

Q1: How many years are your company in the autoparts industry?

A: The company has been founded for 20 years till now.

Q2: What are your major products?
A: Our main products are all kinds of Transfer Case Chain&Timing Chain

Q3: Where are your company?
A: We are located in HangZhou City,HangZhou City,ZheJiang Province, China.

Q4: Are you a factory or trading company?
A: We are a real factory with export licenses.

Q5: What is the MOQ?
A: Normaly, our MOQ is 100pcs ,but different product may have the different MOQ.

Q6:How about the quality of your sensors?
A: Our products have got the ISO9001 Certification. OEM Standard is also welcome and could be
fulfilled. Every item will be tested before shipment. You are very welcome to visit our factory at your convenience.

Q7:How about the warrenty of your sensors?
A: All of our sensors are with warrenty of 1 year, for some sensors the warrenty could be extented to 2 years.

Q8: What is the payment terms?
A: 30% deposit before production,70% balance before shipment.

Q9: Can your company customize sensors?
A: YES! You are very welcome to customize sensors, but it is strongly recommended to provide samples.

After-sales Service: Great
Warranty: 1 Year
Type: Gearbox
Material: Steel
Certification: ISO
Automatic: Automatic
Customization:
Available

|

Customized Request

gear chain

How does a gear chain handle different speeds and loads?

A gear chain is designed to handle different speeds and loads by incorporating specific features and materials:

1. Gear Ratio Selection:

– The gear ratio is the ratio of the number of teeth on the driving gear to the number of teeth on the driven gear. By selecting the appropriate gear ratio, the speed and torque can be adjusted to match the requirements of the application. Higher gear ratios provide lower speed and higher torque, while lower gear ratios offer higher speed and lower torque.

2. Gear Tooth Design:

– The tooth design of a gear chain is optimized to distribute the load evenly across the teeth. This ensures that each tooth can handle its share of the load without excessive stress concentration. The tooth profile and pitch are carefully calculated to provide efficient power transmission and minimize wear.

3. Material Selection:

– Gear chains are typically made from high-strength materials, such as alloy steel or hardened steel, to withstand the loads and stresses imposed on them. The material selection is based on the anticipated loads and the desired durability of the chain. Heat treatment processes, such as quenching and tempering, are often employed to further enhance the strength and toughness of the chain.

4. Lubrication:

– Proper lubrication is crucial for the smooth operation and longevity of a gear chain. Lubricants reduce friction and wear between the gear teeth, allowing the chain to handle higher speeds and loads with reduced heat generation. Lubrication also helps to prevent corrosion and extend the chain’s service life.

5. Chain Tension:

– Maintaining proper chain tension is essential for optimal performance. Adequate tension ensures proper engagement of the gear teeth and prevents excessive slack or binding. Chain tensioners or tensioning devices may be used to adjust the tension and compensate for any elongation or wear that occurs over time.

6. System Design:

– The overall design of the gear chain system, including the selection of supporting components such as gears, bearings, and shafts, plays a vital role in handling different speeds and loads. The system must be engineered to provide adequate strength, alignment, and support to ensure reliable operation under varying conditions.

By carefully considering gear ratio selection, tooth design, material selection, lubrication, chain tension, and system design, a gear chain can effectively handle different speeds and loads. It provides efficient power transmission and reliable performance in a wide range of applications.

gear chain

Can a gear chain be repaired if it is damaged?

In most cases, if a gear chain is damaged, it cannot be repaired and will need to be replaced entirely. The nature of damage to a gear chain, such as broken teeth, worn links, or damaged rollers, often requires the replacement of the affected components.

Attempting to repair a damaged gear chain can compromise its integrity and performance, leading to safety hazards and further damage. It is recommended to consult the manufacturer or a qualified professional to assess the extent of the damage and determine the appropriate course of action.

If a gear chain is found to be damaged, it is important to identify the root cause of the damage. This could be due to factors such as overloading, misalignment, inadequate lubrication, or excessive wear. Addressing the underlying issue is crucial to prevent future damage and ensure the reliability of the gear chain system.

gear chain

What is a gear chain and how does it work?

A gear chain, also known as a roller chain with sprockets, is a type of power transmission chain that is commonly used to transfer rotational motion between two parallel shafts. It consists of a series of interconnected links, known as roller links, which engage with teeth on sprockets to transmit power.

The basic components of a gear chain include:

– Roller Links: These are the individual links that form the chain. They have cylindrical rollers that are connected by side plates.

– Pins: The pins hold the roller links together and allow them to rotate freely.

– Bushings: The bushings are inserted into the roller links and provide a smooth surface for the pins to rotate on.

– Sprockets: The sprockets are toothed wheels that engage with the roller links. They are mounted on the shafts and transmit power by engaging with the rollers.

The operation of a gear chain is based on the principle of meshing between the teeth of the sprockets and the rollers of the chain. When one sprocket is rotated, the engaged rollers are driven, causing the entire chain to move and transmit power to the other sprocket.

The meshing between the sprocket teeth and chain rollers ensures a positive and efficient power transfer. The roller links rotate on the pins and bushings, allowing the chain to smoothly engage and disengage with the sprockets during operation.

Gear chains are widely used in various applications, such as industrial machinery, automotive systems, bicycles, and conveyors, where reliable and efficient power transmission is required.

China Professional Tansfer Case Timing Chain Transmission Gear Chain Box Chain Car Transfer Output Shaft Drive Chain 5012322ab 26976 30965 Hv-071 Hv-062 for Jeep GM 22500 12547628  China Professional Tansfer Case Timing Chain Transmission Gear Chain Box Chain Car Transfer Output Shaft Drive Chain 5012322ab 26976 30965 Hv-071 Hv-062 for Jeep GM 22500 12547628
editor by CX 2023-09-18

gear chain

As one of leading gear chain manufacturers, suppliers and exporters of products, We offer gear chain and many other products.

Please contact us for details.

Mail:gear-chain.com

Manufacturer supplier exporter of gear chain

Recent Posts