Product Description
Chinese Manufacturer Standard Industrial Bicycle and Motorcycle Sprockets Chains 06B 08B 10B 12B 16B
MIGHTY manufacture different types of roller chain sprockets as follows:
European Standard: 03, 04, 05B, 06B, 081, 083, 084, 085, 08B, 10B, 12B, 16B, 20B, 24B, 28B, 32B, 40B;
American Standard: ASA 25, ASA 35, ASA 40, ASA 50, ASA 60, ASA 80, ASA 100, ASA 120, ASA 140, ASA 160, 04C, 06C, 08A, 10A, 12A, 16A, 20A, 24A, 28A, 32A, 40A, 41A, 48A, 50A;
Pitch (mm): 5, 6, 6.35, 8, 9.525, 12.7, 15.875, 19.05, 25.4, 31.75, 38.1, 44.45, 50.8;
Pitch (inch): 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 1″, 1 1/4″, 1 1/2″, 1 3/4″, 2″.
Bore Type: standard bore, bore for set screw, bearing, keyway, taper bush.
Material: steel, stainless steel, cast iron; Surface Finish: phosphate, black oxide, zinc plate, paint, passivate, etc.
OUR SERVICE:
1) Competitive price and good quality
2) Used for transmission systems.
3) Excellent performance, long using life
4) Could be developed according to your drawings or data sheet
5) Pakaging:follow the customers’ requirements or as our usual package
6) Brand name: per every customer’s requirement.
7) Flexible minimum order quantity
8) Sample can be supplied
MAIN PRODUCTS:
1) Timing Belt Pulley (Synchronous Pulley), Timing Bar, Clamping Plate;
2) Forging, Casting, Stampling Part;
3) V Belt Pulley and Taper Lock Bush; Sprocket, Idler and Plate Wheel;Spur Gear, Bevel Gear, Rack;
4) Shaft Locking Device: could be alternative for Ringfeder, Sati, Chiaravalli, Tollok, etc.;
5) Shaft Coupling:including Miniature couplings, Curved tooth coupling, Chain coupling, HRC coupling, Normex coupling, Type coupling, GE Coupling, torque limiter, Universal Joint;
6) Shaft Collars: including Setscrew Type, Single Split and Double Splits;
7) Timing Belt: including Rubber and PU timing belts for industrial;
8) Other customized Machining Parts according to drawings (OEM).
Company Information
ZheJiang Mighty Machinery Co., Ltd. specializes in manufacturing Mechanical Power Transmission Products.
We Mighty is the division/branch of SCMC Group, which is a wholly state-owned company, established in 1980.
About Mighty:
-3 manufacturing factories, we have 5 technical staff, our FTY have strong capacity for design and process design, and more than
70 workers and double shift eveyday.
-Large quality of various material purchase and stock in warhouse which ensure the low cost for the material and production in
time.
-Strick quality control are apply in the whole prodution. we have incoming inspection,process inspection and final production
inspection which can ensure the perfect of the goods quality.
-14 years of machining experience. Long time cooperate with the Global Buyer, make us easy to understand the csutomer and handle the export.
MIGHTY’s products are mainly exported to Europe, America and the Middle East market. With the top-ranking management, professional technical support and abundant export experience, MIGHTY has established lasting and stable business partnership with many world famous companies and has got good reputation from CZPT customers in international sales.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=10000USD, 30% T/T in advance ,balance before shippment.
We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit.To supply customers excellent quality products with good price and punctual delivery time is our responsibility.
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Motorcycle, Agricultural Machinery |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Forging/Casting |
| Toothed Portion Shape: | Curved Gear |
| Material: | 40mn |
| Samples: |
US$ 0.5/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do you calculate the required horsepower for a gear chain drive?
To calculate the required horsepower for a gear chain drive, you need to consider several factors:
1. Speed of the Drive:
– Determine the desired speed of the gear chain drive in revolutions per minute (RPM).
2. Torque Requirement:
– Calculate the torque required by the load or driven equipment. Torque is typically given in pound-feet (lb-ft) or Newton-meters (Nm).
3. Efficiency of the Drive:
– Determine the efficiency of the gear chain drive system. This is usually expressed as a decimal value ranging from 0 to 1.
4. Conversion Factor:
– Determine the appropriate conversion factor to convert the torque units to pound-feet per minute (lb-ft/min) or Newton-meters per minute (Nm/min).
Once you have these values, you can use the following formula to calculate the required horsepower:
Horsepower = (Torque x RPM) / (5252 x Efficiency)
Make sure to use consistent units throughout the calculation.
It is important to note that this calculation provides an estimate of the required horsepower. Actual operating conditions, such as friction, load variations, and other factors, may affect the actual horsepower requirements. Consulting with a qualified engineer or using manufacturer-provided data is recommended for accurate and specific calculations.
Can a gear chain be used in high-torque applications?
Yes, a gear chain can be used in high-torque applications. Gear chains are designed to transmit power and motion efficiently, even under high torque loads. However, there are certain considerations to keep in mind when using a gear chain in high-torque applications:
- Strength and Durability: High-torque applications exert significant forces on the gear chain. Therefore, it is important to select a gear chain with sufficient strength and durability to withstand the torque without deformation or failure. The chain should be made from high-quality materials and have proper heat treatment to enhance its mechanical properties.
- Tooth Design: The gear chain’s tooth design plays a critical role in transferring torque effectively. It is important to choose a gear chain with appropriate tooth profiles, such as involute or modified involute, that can handle high-torque loads without excessive wear or tooth damage.
- Lubrication: Adequate lubrication is crucial for reducing friction and wear in high-torque gear chains. The lubricant should have high viscosity and film strength to withstand the high-pressure contact between the teeth. Regular lubrication and maintenance are necessary to ensure optimal performance and longevity of the gear chain.
- Alignment and Tension: Proper alignment and tensioning of the gear chain are important to ensure smooth and efficient power transmission. Misalignment or improper tension can result in uneven load distribution, increased wear, and reduced efficiency. Regular inspection and adjustment of the chain’s alignment and tension are necessary in high-torque applications.
By considering these factors and selecting a gear chain specifically designed for high-torque applications, it is possible to utilize gear chains effectively and reliably in high-torque mechanical systems.
What are the advantages of using a gear chain in mechanical systems?
Using a gear chain in mechanical systems offers several advantages:
– High Efficiency: Gear chains provide a high level of power transmission efficiency, ensuring minimal power loss during operation. This efficiency is achieved through the positive engagement of the chain with the sprockets, resulting in reliable torque transfer.
– Precise Speed Ratio: Gear chains allow for precise speed ratio control between the driving and driven shafts. By selecting different sprocket sizes, the rotational speed can be adjusted to match specific application requirements.
– Compact Design: Gear chains have a compact design, making them suitable for applications with limited space. The chain can transmit power over relatively long distances while occupying a small footprint.
– High Load Capacity: Gear chains are capable of handling high loads due to their robust construction. The interlocking of the chain with the sprockets ensures a secure power transmission, enabling the chain to withstand heavy-duty applications.
– Versatility: Gear chains are versatile and can be used in a wide range of mechanical systems, including machinery, automotive systems, agricultural equipment, and more. They can accommodate various speeds, loads, and operating conditions.
– Durability: Gear chains are designed to be durable and long-lasting, with resistance to wear and fatigue. They are typically made from high-quality materials such as alloy steel, which provides excellent strength and durability.
– Easy Maintenance: Gear chains are relatively easy to maintain. Regular lubrication and periodic inspection of the chain’s condition are essential to ensure optimal performance and prolong its service life.
– Cost-Effective: Gear chains offer a cost-effective solution for power transmission in mechanical systems. They are generally more affordable compared to other types of power transmission systems and provide reliable performance over an extended period.
In summary, the advantages of using a gear chain in mechanical systems include high efficiency, precise speed control, compact design, high load capacity, versatility, durability, easy maintenance, and cost-effectiveness.
editor by CX 2023-08-08